How to Fix Automatic Repair Loop in Windows 10 Easily

Published Date :
How to Fix Automatic Repair Loop in Windows 10 Easily

Take the help of this step-by-step guide to fix automatic repair loop that couldn’t repair your PC.

The Automatic Repair utility is one of the best programs for Windows PC that allows you to restore the system to its original or previous source whenever you face any problems. The tool diagnoses what factors are causing the errors in the system and helps in solving them.

But what if instead of solving problems, Automatic Repair starts creating them. Sometimes, due to one or more boot errors, the tool may fail to work properly. If you want to Fix Automatic Repair loop in Windows 10 that couldn’t repair your PC then this article will list some best and effective ways to do that.

Methods to Fix Automatic Repair Loop in Windows 10 Precisely

The oncoming sessions of this write-up will include the best and safest ways to fix Automatic Repair loop in Windows 10. Apply these fixes one by one until you get rid of the issue.

Fix 1: Remove the Latest Devices

If you have connected some devices recently and then started facing automatic repair couldn’t repair your PC issues. Then you need to disconnect or remove such devices. Some newly installed devices may be interrupting the working of the repair tool and causing the issue.

Also Read: How to Fix Service Control Manager Error on Windows 10


Fix 2: Check the Disk and Run the System File Checker Scan

If disconnecting does not work, you should take the help of the Command Prompt to run the System File Checker and Disk check commands. These commands will help you determine the exact problems behind the issue and fix Automatic Repair loop in Windows 10. Here’s how:

  1. To launch the Windows boot troubleshooting menu, press the F8 key before Windows startup.
  2. Select See advanced repair options from the Recovery menu.
    Select See advanced repair options From Window Recovery
  3. From the next window, click on Troubleshoot.
  4. Now click on Advanced Options.
    Click on Advanced Options in Troubleshoot
  5. Click on Command Prompt to launch the utility.
    Command Prompt in Advance Option
  6. In the utility, type the following commands followed by pressing Enter simultaneously and wait for them to scan the system.
    chkdsk /r c
    sfc /scannow
    sfc /scannow

After the process is complete, all the boot issues will be solved and now you can start the PC perfectly without any startup repair couldn’t repair your PC issues. The scan will restore and replace the missing files on your PC to run it smoothly.

Also Read: Fixed: Black Screen Problems on Windows 10


Fix 3: Fix the Windows Registry

If the above process does not work, you should repair and restore Windows Registry. When the Registry is restored to the previous state, the PC will run just as you want very easily. Take the help of the steps listed below to restore the Windows Registry through the boot menu:

  1. Launch the Command Prompt with the help of the steps explained earlier.
    Launch the Command Prompt from Advanced Options
  2. Type the command provided below and press Enter.
    C:\Windows\System32\config\regback
    C:\Windows\System32\config\
  3. Windows may ask you to override the files. Type Yes and hit Enter.

After the process is complete, you can restart the PC quite easily without any boot issues. If the problem of windows 10 automatic repair couldn’t repair your PC persists, follow the next method.

Also Read: 18 Best Free PC Cleaner Software For Windows 10, 8, 7 In 2021


Fix 4: Take the Help of the Deployment Image Servicing and Management (DISM)

If the above solution does not work, you can also scan the system for Deployment Image Servicing and Management (DISM). This scan will repair the corrupted files on the system. Follow the steps below to do that:

  1. Launch the Advanced Options as did earlier.
    Advanced Options in Troubleshoot
  2. Click on Startup Settings.
    Select Startup Settings
  3. Restart the PC.
    Restart your PC
  4. Press F5 to Enable Safe Mode with Networking.
    Enable Safe Mode with Networking in Settings
  5. After the system restarts, search for Windows Powershell Admin and run the utility.
  6. Type the command and hit Enter.
    DISM /Online /Cleanup-Image /RestoreHealth
    RestoreHealth
  7. Now enter the following command and press Enter.
    sfc /scannow
    Enter sfc /scannow

After the scan is complete, restart the system. You will get the perfect answer for how to fix automatic repair couldn’t repair your PC Windows 10.

Also Read: How to Fix Error Code 0x800f08a in Windows 10 – TechPout


Fix 5: Try Limiting the Boot Loops

The next thing you can try to fix Automatic Repair loop in Windows 10 that couldn’t repair your PC is to limit the boot loops. Take the help of the following steps to do that:

  1. Launch the Command Prompt just like earlier.
    Launch the Command Prompt in Boots Loop
  2. Enter the command bcdedit and see whether the value for the recoveryenabled is yes or no, if it is yes, change it to no by typing this command.
    bcdedit /set {default} recoveryenabled no
    Type bcdedit /set {default} recoveryenabled no in Command

After the process is complete, close the window and boot the windows perfectly. Now you will not face the windows 10 automatic repair couldn’t repair your PC.

Also Read: How to Fix Windows 10 Taskbar Not Working


Fix 6: Reset Windows

If none of the above-listed methods work to fix Automatic Repair loop in Windows 10 that couldn’t repair your PC. Then you need to reset the Windows. Resetting the device will erase every setting or app that is forcing the utility to loop. Follow the below-listed steps to rest the Windows:

  1. Launch the Troubleshooter as you did earlier.
  2. Select the option named Reset this PC.
    Reset this PC
  3. Now either select Keep my files or Remove everything as you want.
    select Keep my files or Remove everything
  4. Follow the on-screen instructions to reset the PC.

Once the PC is reset, set up a new device as per your requirements. Now you won’t face startup repair couldn’t repair your PC issues.

Also Read: How to Get Help in Windows 10 [Complete Guide]


Fixed: Automatic Repair Loop in Windows 10 That Couldn’t Repair Your PC

So these were some easy methods to Automatic Repair loop in Windows 10 that couldn’t repair your PC. With the help of one or more of these methods, you can boot the system easily.

The repair screen will not repeat on loop and you can enjoy using the PC as meant. For precision, we suggest that you go through these methods simultaneously and apply the fixes in the same manner.

If you have any other doubts related to how to fix automatic repair couldn’t repair your PC on Windows 10, then write to us in the comments. We will get back to you as soon as possible. If you need interesting tech updates, blogs, and tutorials delivered to your inbox, subscribe to the newsletter from the Techpout blog.

Jay Galiyal
Jay is an incredible writer who loves to give life to words. He is always carrying out some research and likes to keep himself updated with the happenings around him. Writing runs in his blood makes him happy. When not working, you can find him singing, composing poetry, writing horror stories, playing action games on the laptop and munching on food.

Leave a Response

Related Posts