Today, we are going to discuss how to fix undoing changes made to your computer with ease. Read the entire article for further information.
Many times, your Windows 10 may get stuck into a boot loop after installing the most recent updates and patches. When this occurs, an error message appears that says We couldn’t complete the updates: Undoing changes. This error usually occurs when Windows Update files are not downloaded completely and if you have corrupted system files.
Encountering the Windows 10 undoing changes error is extremely annoying because it keeps on appearing on the screen. In order to fix the issue, users have ended up trying to reboot their machine many times, but unfortunately, the issue remains unchanged. However, you don’t need to worry about it, as the problem is solvable too.
In this write-up, we are going to teach you how to fix undoing changes problem and error messages in Windows 10/11. So without further ado, let’s read them below!
What are the Reasons for Undoing Changes Made to your Computer on Windows 10, 11?
Undoing changes error in Windows 10/11 might occur for a variety of reasons. Listed below are the most common ones.
Corrupted, broken, or damaged system files.
The update service abruptly stopped working while new or available system updates were downloading.
Unexpected/random shutdown during the process.
Solutions on How to Fix Undoing Changes Made to your Computer on Windows 10, 11
There are numerous solutions to fix undoing changes error on Windows 10. Below we have explained some tested and tried solutions, so go through each one of them to see which one works best for you.
Pro Tip: Restart your PC and Disable Wi-Fi Connection
Before proceeding, the first thing you can try to fix the undoing changes problem and error messages is to shut down the computer system and disable the Wi-Fi. Alternatively, you can also try to unplug the router, and wait for a few minutes, then turn on the system again to see if the error is solved. If not, then proceed with the other solutions explained below.
Solution 1: Boot Windows into Safe Mode
Initially, you need to enter Safe Mode before applying any advanced fix. So, here are the steps you need to comply with in order to boot Windows into Safe Mode.
Step 1: Press the SHIFT + F8 key simultaneously when the system reboots.
Step 2: The above procedure will take you to the Advanced Startup Screen with various options.
Step 3: Wherein, you have to click on Options, then troubleshoot.
Step 4: Next, make a click on Advanced options, later Startup Settings.
Step 5: Finally, turn on the Safe Mode.
Now, Windows 10 will boot into safe mode, so you can easily apply the solutions below.
Outdated, faulty, or broken device drivers are mainly responsible for the PC error messages including “undoing changes made to your computer on Windows 10, 11”. Therefore, it is crucial to keep them always in good working condition. You should update the drivers from time to time.
The user can update the drivers manually as well as automatically.
Update Drivers Manually: To perform driver update manually you need to visit the manufacturer’s official website. And, search for the exact drivers to your Windows operating system. For updating the drivers manually, you may also use the Windows default driver support called Device Manager.
Update Drivers Automatically: And if you are unable to find the correct driver for your Windows operating system manually, then you can seek help from Bit Driver Updater. It is the perfect utility for updating all faulty or outdated drivers automatically. With Bit Driver Updater, you can update all outdated drivers with one click of the mouse. Plus, the tool automatically finds the most suitable drivers for you. Follow the steps below to fix Undoing Changes error on Windows 10/11 this way.
Step 1: Give Bit Driver Updater a try for Free from the download button given below.
Step 2: Then, double click the downloaded file and execute the on-screen instructions to get Bit Driver Updater installed successfully.
Step 3: Launch the Bit Driver Updater on your machine and let the software finish the scanning for the outdated or faulty drivers.
Note: If you want to run a manual scan for outdated or faulty drivers then you can click on the Scan button from the left menu pane.
Step 4: After the scanning, the software lists all the faulty or missing drivers, you need to review the list and click on the Update All button.
Important: The premium version of this amazing driver updater allows its users to reach out to the advanced features of the software. Including complete technical support, scan scheduling, system optimizer, 60 days money-back guarantee, and backup & restore tool. So, it would be great if you rely on the full version of this excellent driver updater software.
Solution 3: Uninstall System Updates
The next solution to fix the Undoing Changes to your Computer error is to uninstall the latest system updates and restore them to the previous version. For this, you need to take the help of the Boot Menu just as you did in the first solution. Follow the steps provide below to know what you can do:
Step 1: Press the SHIFT + F8 keys after the system restarts.
Step 2: When the Advanced Startup Screen appears with multiple sections click on Options, then troubleshoot.
Step 3: Next, click on Uninstall Updates and then on Uninstall latest quality update.
Step 4:Uninstall the updates and roll them back to the previous version.
If uninstalling the updates fails due to any reason, then you can try the next solution that suggests that you clear them.
Solution 4: Clear All Latest Updates
Another way to deal with this issue is deleting all the recently installed updates. Follow the steps shared below to do so:
Step 1: Open the Run Dialog box by pressing Windows Logo + R keys.
Step 2: Then, input appwiz.cpl in the Run box and hit the Enter key from your keyboard.
Step 3: This will take you to the Programs Window, wherein you need to click on the View Installed Updates from the left menu pane.
Step 4: Now, a list of installed updates will be displayed. Choose the most recently installed Windows 10 updates.
Step 5: And, make a click on Uninstall button to delete the chosen updates.
Step 6:Restart your computer for the changes to come into effect.
Thereafter, the Windows 10 update undoing changes made to your computer should be fixed. But unfortunately, if not then try the other fix.
DISM stands for Deployment Image Servicing and Management. It is a Windows in-built tool that helps rectify numerous Windows issues. Therefore, you can use this command-line utility to improve the Windows 10 image. And, users need to ensure that this can be done before running SFC. Now, have a look at the steps to do so:
Step 1: Go to the Search bar of your Windows, and type the Command Prompt. Next, choose the best match search result and click on the Run As Administrator.
Step 2: Once Command Prompt launches under administrator’s privileges, then write the following command and press Enter key from your keyboard.
DISM.exe/Online /Cleanup-image /Restorehealth
That’s it! Reboot your computer and check to see if running the DISM command can fix Windows undoing changes made to your computer. If not, then try the next solution.
When you encounter Windows Update error messages performing an SFC scan can work. You can do so with the simple steps shared below:
Step 1: Again, open Command Prompt as administrator.
Step 2: Then, input SFC/scannow and hit the Enter key from your keyboard.
Step 3: Wait until the command is executed and repair all the faulty or corrupted system files.
Step 4: Lastly, start your PCagain.
After this, test if the strategy can fix Windows 10 undoing changes made to your computer error message. Sadly, if not, then apply the next fix.
Solution 7: Run Windows Troubleshooter
If none of the above-mentioned solutions have worked, then seek help from Windows itself. Windows 10 comes up with an amazing feature called Troubleshoot. This built-in Windows utility has been specially programmed to detect and fix the most common Windows errors or problems. Here is how to run a Windows troubleshooter to fix undoing changes made to your computer stuck issue:
Step 1: Launch Windows Settings by pressing the Windows logo + I keys at the same time.
Step 2: Then, choose Update & Security from the available options.
Step 3: From the next window, scroll down to choose Troubleshoot from the left menu pane.
Step 4: After this, locate Windows Update under the Get up and Running section and click on Run the Troubleshooter.
Step 5: Go with the on-screen instructions to complete the process.
Now, reboot your system. Running Windows Troubleshooter should fix undoing changes made to your computer on Windows 10.
The next that you can do to fix the Undoing Changes Made to Your Computer is to enable the Windows Update service manually. P. S. This solution only works if your error has a suffix of 0x800f0988 or 0x800f0922. Hence, if you ever face this issue while updating Windows, follow the steps below to fix it:
Press the Win+S keys, search for Services, and press Enter.
Double-click on the Windows Update in the list.
Change the Startup Type to Automatic and click on the Start button.
Click on Ok to apply the settings.
Now, close the Services, press the Win+S keys, type Check for Updates, and press Enter.
When the update utility appears, click on the Check for Updates button.
Lastly, download and install all the updates that appear.
If you face any error while updating the OS, write down the code and visit the Microsoft Catalog.
Paste the code in the search bar and press click on Search.
Download the required OS updates and install them.
So, this solution will easily fix the errors related to undoing changes. However, if you still need help solving this, follow the next solution.
Solution 9: Temporarily Stop Windows Automatic Updates
Follow the steps below to temporarily block system updates as well as other updates from being downloaded in order to fix Windows 10/11 undoing changes error.
Step 1: Open Windows Settings by pressing Windows and I keys together.
Step 2: Search for Network & Internet and click on it.
Step 3: From the left pane, click Status and then click on Change connection properties.
Step 4: Under the Metered connection, enable the toggle button (Set as metered connection).
Solution 10: Rename the SoftwareDistribution Folder
Softwaredistribution folder is utilized in order to store the Windows installation files temporarily. But, when the respective files either have gone corrupted or become unresponsive during installation, you might run into Windows 10 undoing changes error. To resolve it, try renaming the folder using the simple steps below:
Step 1: Launch Command Prompt.
Step 2: Input the following command and be sure to press Enter after each command to execute it.
net stop wuauserv
net stop bits
rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
net start wuauserv
net start bits
Step 3: Now, you need to update Windows to test the issue. Hopefully, you should not encounter the Undoing changes problem in Windows 10/11.
You may not know this but the Event Manager can also assist you in fixing the Undoing Changes Made to Your Computer error. With the help of this tool, you can easily check the logs of operations and check the sectors for errors. Follow the steps below to know more:
Press the Win+S keys, type Event Manager, and hit the Enter key.
Double-click on the Windows Logs and then open Setup.
Under the list of the Setup items, look for the one that shows some error under Source.
Copy the error code and use it to find the solutions on the Internet.
If you find that the error still comes up, then use the next solution.
Solution 12: Upgrade to Windows 11
The ultimate solution to fix the Undoing Changes Made to Your Computer is to upgrade the OS to Windows 11. If you are using Windows 10 or an outdated version of Windows 11, then upgrade the same to the latest Windows 11 version. To upgrade Windows 10 to Windows 11, you need to visit the official website of Microsoft to download Installation Assistant. Install the tool and use the on-screen instructions to upgrade.
Undoing Changes Made to your Computer on Windows 10: FIXED
That is all! By applying any of the aforementioned solutions, you can easily fix undoing changes made to your computer on Windows 10. Additionally, we recommend using Driver Updater to keep Windows 11 drivers always in good working order as well as enhance overall PC performance. You can get the utility for free from the download button shared below.
If you have any doubts, and further queries then please contact us through the comments section below. Before you go, do subscribe to our Newsletter for more troubleshooting guides just like this one. Also, you can connect with us through Facebook, Instagram, Twitter, or Pinterest.
Harshita Sharma is a technical writer with quite a distinct understanding of the tech realm. She is a tech enthusiast who believes that tech knowledge should reach one and all and tries to convert the sketchy knowledge into the simplest possible form for making people understand the tech world better. When not playing with words, she loves to travel and explore new places. And, is a coffee & cricket connoisseur.
Subscribe to Our Newsletter and stay informed
Keep yourself updated with the latest technology and trends with TechPout.