CP2102 Driver USB to UART Bridge Controller [Windows 10, 11]

Check out the entire article to understand how to execute the CP2102 driver download and install on Windows 10/11 with ease.

CP2102 is a USB device that works like a bridge for the devices. With the help of this bridge, the system can communicate and connect with the UART device using a USB port. Hence, if you want the UART devices to run properly on your system, then you need to download and update its driver for ease.

With the help of this article, we will have a look at some of the easiest and smartest ways to download the CP2102 USB to UART bridge controller driver with ease. In the coming sections, you will find multiple methods listed and explained to you. Try any of these methods and get the latest version of the driver. So, without any further ado, let’s have a look at the method right away.

How to Download CP2102 Driver for Windows?: The Methods

The coming sections of this tutorial will list the best and most trusted methods to download the driver and then proceed with the CP2102 driver install. The first three methods in this list are manual and tiring. These will take up a lot of your time and effort and may even fail afterward. Hence, it’s best to use the last automatic method that allows you to update the driver with a single click.

Method 1: Visit the Official Website of the Manufacturer

The manufacturer of the CP2102 chip can provide you with the official driver for the same. However, if you don’t have the required knowledge about the manufacturer, the chip, or the website, you may fail to update the CP2102 driver for Windows. However, the below steps will help you download the driver with ease:

1. Firstly, visit the official webpage of the CP2102 chip.
2. On the page, you will find a section stating Download USB to UART Bridge VCP Drivers. Click on the same to proceed.
3. On the drivers’ page, click on the Downloads tab.
5. Under the Software category, you will find a list of drivers. Click on the individual driver(s) that you want to download.
6. A .zip file will download on your PC. Extract the file and then install the driver.
7. Once you install the driver, restart the system.

As you can see, this method is manual and may pose some problems for you while downloading the CP2102 driver for Windows 10/11. If you felt that way and faced any problem, then try the next solution.

Also Read: USB to rs232 Driver Download and Update for Windows 10, 11 (Quickly)

---

Method 2: Use the Device Manager

Another approach to download and update the CP2102 USB to UART bridge controller driver is using the Device Manager. The Device Manager is a Windows-integrated tool. The sole task of this utility is to help you manage all the integrated and external connected devices and peripherals. You can also use it to update the drivers. Follow the steps below to know more:

1. Firstly, right-click on the Windows logo and open the Device Manager.
2. When the tool appears, you will find various categories. Double-click on the Other Devices category to expand it.
3. Look for the CP2102 USB to UART Bridge Controller, right-click on it, and then click on the Update Driver.
4. A pop-up may appear on the screen asking you to assist with the update procedure. Click on the button stating Search Automatically for Driver Updates.
5. Some instructions may appear and you need to follow the same to execute the CP2102 driver install.
6. When the entire process completes, restart the system.

So, this was the entire procedure explaining how to use the Device Manager for such updates. Try the next solution if this one fails.

---

Method 3: CP2102 Driver Download Using System Update

Another method, although a far-fetched one, to update drivers is using Windows Update. Updating the Windows operating system to the latest version can also help you update some drivers. This also includes the CP2102 USB to UART bridge controller driver. Follow the steps below to know more:

1. Press the Win+S keys, type Check for updates, and hit Enter. This will redirect you to the Windows Update utility.
2. Wait for the utility to load and click on the Check for Updates button.
3. Some OS updates may appear on the screen. Download and Install the same updates to proceed.

This method may not work if the OS is unable to find the required driver for your system. Hence, it’s wise to forget about all the above methods and get the automatic one for ease.

Also Read: How to Download WD SES Device USB Device Driver for Windows 10

---

Method 4: Bit Driver Updater- The Best to Update CP2102 Driver

At last, allow us to present to you the most amazing solution to update and install any driver. Bit Driver Updater is an amazing software for Windows devices. Using this standalone solution, you can update any type of driver with a single click. Moreover, if you want to schedule the updates, then you can take the help of this software. Additionally, with Bit Driver Updater, you also get features like automatic updates, driver backup/restore, ignore updates, and more. The multilingual UI of the tool makes it easy for all to use the tool. Other features are also available and you can access them after downloading and installing the tool.

For now, let’s have a look at the procedure to execute the CP2102 driver download and update on Windows 11/10. Follow the steps below to know everything:

1. Download the Bit Driver Updater by clicking the blue Download button below.
2. Install the software on your Windows device and run it afterward.
3. The tool will automatically start the scanning of your system. Click on the Scan Drivers button if it does not.
4. When the list updates appear, look for the CP2102 driver and click on the Update Now button across it. Alternatively, you can also take the help of the Update All button to get updates for all the outdated, missing, and broken drivers with ease.
5. When the whole procedure is completes, restart the system.

---

CP2102 Driver Download and Install on Windows: Successful

So, here we are concluding the above sections showing you multiple ways to download the CP2102 USB to UART bridge controller driver. We hope that by using at least one of these methods, you were able to install the driver with ease. However, if you have questions related to the guide or its methods, then use the comments section below. There, you can present your queries, share your feedback, write a review, and even provide solutions for our betterment.

Also Read: Fresco Logic USB Display Driver Download & Update for Windows

We appreciate your thoughts and suggestions. If you liked this article solving how to download the CP2102 driver on Windows 11/10, subscribe to our newsletter right away. You can also follow us on Facebook, Twitter, Instagram, Pinterest, and Tumblr.