Error 0x80070035, widely recognized as “The network path was not found,” is a frequent issue that arises when attempting to reach a shared folder or drive over a network. This error indicates that your system is unable to reach the specified network resource, preventing access to shared files or network locations.

The cause of this error can vary and may include incorrect network configurations, corrupted network credentials, or outdated drivers.

In this blog, we will explore some of the most effective methods to resolve Error 0x80070035 on Windows. We will also cover some common causes of the error so that you can avoid it in the future.

What is Error 0x80070035?

Error 0x80070035 is a common issue that occurs when Windows cannot find a network path. When attempting to access a shared folder, drive, or network location, your computer fails to connect, and you see the error message: “The network path was not found.” This means that your system cannot locate the network resource or there’s an issue with network connectivity.

The problem can arise from a variety of reasons, such as network settings, network configuration, or even outdated drivers. So, let’s break down the common causes and provide easy-to-follow solutions to fix Error 0x80070035.

Common Causes of Error 0x80070035

Several factors can contribute to Error 0x80070035. Understanding these causes can help you avoid running into the problem again in the future:

• Windows Defender Firewall or Antivirus – Sometimes, security software blocks network communication, preventing access to network drives or shared folders.

• Outdated System – If your system is not up-to-date, some features or fixes that resolve network issues may be missing.

• Network Configuration Issues – Incorrect network settings, such as disabled network discovery or file sharing, can prevent you from accessing shared folders.

• Disabled SMB (Server Message Block) – SMB is a protocol used to share files over a network. If it is turned off, your PC cannot communicate with other devices on the network.

• Incorrect Network Name/Path – Typing the wrong network path or filename can lead to this error.

• DNS Resolution Problems – If your system cannot resolve the domain name to an IP address, the network path will not be found.

How to Fix Error 0x80070035

Now that you know some of the common causes of the 0x80070035 error, let’s go through the solutions one by one.

1. Enable SMB 1.0

Server Message Block (SMB) is a protocol that allows computers to share files and printers on a network. If SMB is disabled, it can cause the network path was not found error. Here’s how to enable SMB 1.0:

• Open Control Panel by typing it into the search bar and clicking the result.
• Click on Programs.

• From the Programs and Features window, select Turn Windows features on or off from the left pane.

• In the Windows Features window, scroll down and check the box for SMB 1.0/CIFS File Sharing Support.

• Click OK and restart your PC.
• Enabling SMB should allow your system to communicate with other devices and resolve Error 0x80070035.

---

2. Modify Network Security Settings

Sometimes, incorrect network security settings can trigger Error 0x80070035. You can change the settings to use stronger encryption protocols like NTLMv2, which might help fix the issue. Here’s how to modify the security settings:

• Press the Windows key + R.
• Type secpol.msc and hit Enter.

• Go to Local Policies and select Security Options.

• Look for LAN Manager authentication level under Network security.
• Double-click it and select Send LM & NTLM – use NTLMv2 session security if negotiated from the drop-down menu.
• Click Apply and OK to save the changes.

• After modifying these security settings, restart your PC to see if the network path not found error goes away.

Also know: How to Fix Driver Overran Stack Buffer Error in Windows 10

---

3. Reset TCP/IP and Enable NetBIOS

Sometimes network-related issues can occur if your TCP/IP stack is misconfigured. Resetting it and enabling NetBIOS over TCP/IP can resolve Error 0x80070035. Follow these steps:

• Press Windows key + R.
• Type ncpa.cpl and press Enter to open Network Connections.

• Right-click on your Wi-Fi or Ethernet network and select Properties.

• Under the Networking tab, click on Internet Protocol Version 4 (TCP/IPv4) and click Properties.

• Click Advanced, then go to the WINS tab.
• Select Enable NetBIOS over TCP/IP and click OK.

• Restart your PC and see if you can now access the shared network resources.

---

4. Ensure Folder Sharing Is Enabled

If the folder you are trying to access is not shared correctly, you may encounter the network path was not found error. Follow these steps to ensure that folder sharing is enabled:

• Right-click on the folder you want to share.

• Click on Properties and go to the Sharing tab.
• Click on Advanced Sharing.
• Check the box for Share this folder and give it a name.
• Click Apply and then OK.

• This will ensure that your folder is properly shared and accessible to other devices on the network.

---

5. Enable Network Discovery and File Sharing

If Network Discovery and File and Printer Sharing are turned off, Windows may not be able to locate the network path, resulting in Error 0x80070035. Here’s how to enable these settings:

• Open Control Panel.
• Go to Network and Internet, then click Network and Sharing Center.

• Click on Change advanced sharing settings on the left.

• Under the Private profile, toggle on Turn on network discovery and Turn on file and printer sharing.

• Click Save changes and restart your PC.

---

6. Reinstall Network Adapter

Network adapter issues can lead to Error 0x80070035. Reinstalling your network adapter will allow Windows to reinstall the drivers, potentially fixing any connectivity issues. Here’s how to do it:

• Open Device Manager by typing it into the search bar.
• Click on View and select Show hidden devices.

• Expand the Network adapters section.
• Right-click on each network adapter and select Uninstall device.

• Restart your PC, and Windows will automatically reinstall the necessary drivers.
• After your PC restarts, check if the network path not found error has been resolved.

---

7. Use Registry Editor

If none of the above solutions work, you can try editing the Windows Registry to fix Error 0x80070035. However, be cautious when editing the registry, as incorrect changes can cause other problems. Here’s how to do it:

• Press the Windows key + R, and the Run dialog box will appear.
• Type regedit and press Enter to open the Registry Editor.
• Navigate to the following path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters

• Find AllowInsecureGuestAuth. If it does not exist, right-click on the right panel and select New > DWORD (32-bit).
• Name it AllowInsecureGuestAuth and set its value to 1.

• Click OK and restart your PC.
• This should resolve the network path not found error if the issue was related to guest authentication.

Also know: 502 Bad Gateway Error: Best Ways to Fix This Problem

---

Conclusion

If you encounter the 0x80070035 error on your Windows PC again, do not let it leave you feeling frustrated. Even if you are not familiar with technical terms, the troubleshooting steps provided will guide you through fixing the “network path was not found” issue.

These easy-to-follow solutions are designed for users of all skill levels, making it simple for anyone to resolve the problem and get their network up and running smoothly again.